木材及木基材料吸湿尺寸稳定性检测方法研究

为实现木材及木基材料吸湿尺寸稳定性横向比较,规范其检测方法,依据现有相关检测标准,借鉴日本工业木材吸湿尺寸稳定性检测方法,结合木质材料特性以及我国的具体情况,提出一种木材及木基材料吸湿尺寸稳定性的检测方法,即以温度20℃、相对湿度65%条件下的材料尺寸为基准,测定在温度40℃、相对湿度为75%和90%的两种吸湿环境条件下的材料尺寸变化。通过该方法对柚木、印茄木、朴木3种不同尺寸的木材和对多层材料、高密度纤维板、普通刨花板3种木基材料的吸湿尺寸稳定性进行测定,以评价该方法的适用性和可行性。结果表明:木材与木基材料试样不超过12 d即可达到吸湿平衡,不同材料尺寸变化率、湿胀系数的大小关系也与实际情况一致。因此木材与木基材料试样均适于用该方法。     

作物根系形态对施肥措施的响应

氮磷钾是植物生长所必需的营养元素,但土壤中植物能利用的有效成分低,限制作物生长发育,而植物可以形成特有的适应机制来应对不同的生长环境。本文综述了作物为适应不同施肥条件所产生的一系列根系形态学变化。分析了不同施肥处理对作物根系形态指标(根长、根表面积、根直径、根体积和根冠比等)的影响：氮对作物影响主要在侧根,低氮胁迫下,根系纵向伸长,增加根长、根体积；低磷条件下,植物普遍抑制主根生长,刺激侧根发育生长,诱导根毛形成；缺钾抑制细根生长,根表面积、根体积等也显著降低；普遍随元素水平的提高,作物根长、根体积、根直径、根表面积和其他根系特征均呈先增加后减少的趋势,植物根系发育产生“低促高抑”的现象；有机肥比化肥可以弥补化肥养分单一和供肥不平衡的缺点,与化肥配合施用更能促进根系生长发育,增加根系体积和总表面积；作物不同基因型品种对肥料胁迫的响应也不尽相同,高效基因型具有良好的根系形态和根系分布,以获得更多的养分。为有效利用有限的肥料资源以及高效作物品种的选种提供理论基础,对作物进一步达到经济收益最大化和环境污染最小化具有重要意义。     

环保包装及环保包装的设计

在当今社会,包装扮演着越来越重要的角色.本文从实际出发,阐述了环保包装的重要性,环保包装是未来包装行业的发展趋势.文章从包装材料、设计等方面进一步阐明了环保包装的设计理念、设计方法,并且明确了作为设计师的职责及作为社会公民应具有环保意识.环保的设计理念必将成为未来包装行业的核心理念,环保、绿色包装是时代发展的必然要求.     

基于仿真理论确定缓冲特性曲线方法的研究

本论文探索了一条确定缓冲特性方法的新途径，通过测定缓冲材料的静态特性与一次动态；中击数据为基础，建立数学模型，利用最小二乘法进行误差分析，并使用Madab/Simulink软件仿真出缓冲特性曲线。这种方法得出的缓冲特性曲线准确性高、试验周期短，待理论成熟必将成为今后缓冲材料特性测试的主要方法。     

水泥刨花板在我国的应用和发展前景

简要介绍了国内外水泥刨花板的发展概况，水泥刨花板的性能、应用及其生产方法，水泥刨花板的市场发展前景广阔，发展水泥刨花板符合国家的产业政策。     

园林有机废物合成栽培基质的应用前景

介绍园林有机废物变栽培基质的原因、过程，产品应用实例，表明园林有机废物变栽培基质是节约型园林绿化发展的新途径，具有较好的社会效益和生态效益。     

昆明动物园野生小白鹭营巢高度选择与营巢材料研究

对昆明动物园内干香柏树上营巢的野生小白鹭进行研究,测算其最低适宜营巢枝干和实际最低营巢枝干占树高的百分比,并检测两者的差异显著性。结果表明,实际营巢高度与适宜营巢高度占树高百分比存在显著差异,可能因为亲鸟为避免来自地面的干扰,选择离地较高的位置繁育后代。通过分析坠落鸟巢的构成材料,发现其由268根植物枝条构成,其中91%为干香柏,与主要营巢树一致,说明此地可能由于提供丰富的营巢材料而被鹭群选择成为繁殖地。建议公园积极加强野生涉禽的科学管理,降低繁殖区内及周边的干扰。     

Variations in soil chemical properties and microbial biomass in artificial gaps in silver fir stands

Changes in soil chemical and microbiological parameters in small (185 m²) and medium (410 m²) gaps, created in mature silver fir (Abies alba Mill) stands (mean height 30 m) in the Calabrian Apennines (Southern Italy), were studied over 2 years. Medium gaps had high soil temperature and photosynthetically active radiation (PAR) transmittance and low soil moisture. Within small gaps we detected a greater amount of organic matter, with respect to under canopy cover sites and medium gaps. Moreover, a different trend of the organic matter between small and medium gaps was observed. In the medium gaps, with respect to under canopy cover sites and small gaps, we found a relatively low content of organic matter, associated to a lower amount of humic acid, which suggested that the organic substrate undergoes a mineralization rather than a humification process. An opposite trend was observed in small gaps, where the increase of organic matter content, associated to an increase of humic acid and microbial biomass, suggested a better humification process. Moreover, in small gaps the highest level of urease and the greatest fluorescein diacetate (FDA) hydrolysis were observed. The different trend of organic matter observed in small and medium gaps may be related to changes in the environmental conditions. PAR transmittance, significantly higher in medium gaps, contributed to increase soil temperature and decrease soil moisture, affecting soil microbial populations and organic matter trend. These results suggest that the creation of small gaps represents the silvicultural practice with minor environmental impact.     

浅谈施工质量管理

项目施工过程中的质量控制涉及到质量形成全过程的各个环节，包括：专业技术、管理技术、人、机、料等各个要素的控制。     

An “electronic nose” as a potential device for fire detection of forest product fire loads in enclosures

Abstract

Saving lives and properties are of primary importance in fire disasters. Unfortunately, current fire detectors are not fast enough to allow the detection of many fires, especially, at the smouldering stages. Some preliminary studies on laevoglucosan (LG), as an important product from cellulose degradation, have shown interesting properties and could be detected by devices classified as “electronic noses” (e-noses). In the present work, the mechanisms of pyrolysis of some ligno-cellulosic materials were investigated using thermo-gravimetric analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy and by a tube furnace with a view to determining the major degradation products from wood, white paper and cardboard samples. Additionally, an odour sensor, made of tin oxide semiconductor thin film, was employed to evaluate its sensitivity in detecting LG. It was found that LG can be readily found among the thermal degradation products of cellulosic materials in question, and that the metal oxide sensor employed was sufficiently sensitive in detecting its presence. Therefore, the work opens up the potential of using such a sensor as an “e-nose” for the early detection of fires stemming from forest product fire loads in storage places and in other enclosures.